synchronization Hydraulic cylinder During operation, two different control modes can be adopted. It is a control mode with high precision requirements for synchronization and short stroke. In such a system, if the stroke of the two hydraulic cylinders is also required to be limited by factors such as the manufacturing and use space of the jacked equipment, the synchronization valve cannot be used at this time.

This is because in actual application Hydraulic system In, the so-called synchronization valve cannot guarantee high synchronization accuracy. Therefore, we must use synchronous cylinder and consider it from the two aspects of principle design. For example, in an electric drainage station, it is required to jack up before operation, add lubricating oil to the rotor bearing, and then put it down for operation. Due to various restrictions, the piston stroke is very small.

At the same time, there is still some error in the height, so we require that both hydraulic cylinders should contact the rotor contact surface before the system can boost to prevent damage to the motor. Therefore, in order to solve this problem, we have paralleled a two position two-way valve on the oil inlet of two cylinders when designing the schematic diagram Solenoid valve To ensure that the two cylinders rise synchronously.

The other control mode is the control mode that requires high synchronization accuracy and requires high thrust of the hydraulic cylinder piston rod. In such a system, if the two piston rods cannot be synchronized, the roller shaft will be bent, which is likely to cause damage to the machine. In this way, it will have a great negative impact on the entire production chain.

Therefore, in order to maintain the stable operation of the whole system and reduce noise as much as possible, it is difficult to select a suitable synchronization valve when we design the system. Therefore, we need to select a suitable synchronous hydraulic cylinder to ensure that it meets the requirements.

Foshan Fuchao Hydraulic Electromechanical Equipment Co., Ltd. is a hydraulic machinery manufacturer integrating design, development, production, sales and service Oil cylinder manufacturer Enterprise. We have professional processing equipment, strong technical force, and can design special non-standard hydraulic machinery, non-standard cylinders and hydraulic systems according to customer needs.

Our company follows the service concept of "treat people with integrity, quality first, customer first", and the pioneering spirit. Improve the production process by integrating the professional technology of similar products at home and abroad. We Hydraulic cylinder manufacturer Reliable products are manufactured with imported excellent hydraulic parts and domestic hydraulic parts. It is widely used in metal material industry for forming products.