Hydraulic cylinder manufacturer Enterprise design Hydraulic cylinder What are the factors to be considered?

In the aspect of hydraulic cylinder, we will continue to introduce and explain today. The first is the problems that need to be considered in hydraulic calculation, and the second is the problems that need to be considered in the design of hydraulic cylinder. These are the basic aspects of hydraulic cylinder, Oil cylinder manufacturer It is also necessary to know the basic knowledge, so we will explain it in detail below, so that we can better understand the hydraulic cylinder.

The main problems to be considered in hydraulic calculation are as follows:

Question 1: How to determine the maximum thrust of the hydraulic cylinder?  

Question 2: How to select the working pressure of the hydraulic cylinder?

Question 3: How to determine the inner diameter of the hydraulic cylinder?

Question 4: How to calculate the oil flow required by the hydraulic cylinder?

Question 5: How to select the oil pump?

Question 6: How to select the motor to drive the oil pump?

Question 7: How to determine the tubing size?

Question 8: How to determine the fuel tank capacity?

Problems to be considered when designing hydraulic cylinders, Oil cylinder manufacturer Attention should also be paid to when designing the hydraulic cylinder, which mainly includes:

(1) When the hydraulic cylinder reciprocates, its speed and traction can be guaranteed.

(2) It is necessary to shorten the overall dimensions as much as possible to make the structure compact.

(3) The piston rod shall not be pressed to avoid bending deformation.

(4) Each part shall have sufficient rigidity, strength and durability.

(5) Avoid lateral load on the hydraulic cylinder.

(6) Deflection between piston, piston rod and guide rail shall be avoided.

(7) The sealing performance of the hydraulic cylinder is good, which can avoid leakage.

(8) Standard size and standard parts shall be adopted, and some measures shall be taken into consideration.

(9) It shall be able to reduce costs and facilitate manufacturing and maintenance.