assembling Non standard hydraulic cylinder The hydraulic circuit should be depressurized before. Otherwise, when the oil pipe adjacent to the oil cylinder is loosened, the high-pressure oil in the circuit will be ejected rapidly. When the hydraulic circuit is depressurized, first loosen the hand wheel or pressure regulating screw at the overflow valve to unload the pressure oil, and then cut off the power supply or cut off the energy source to stop the hydraulic equipment.

During assembly, the threads at the top of the piston rod, the threads at the oil port, the surface of the piston rod and the inner wall of the cylinder liner shall be protected against damage. In order to resist the straightness or deformation of slender parts such as piston rod, skids shall be used for supporting balance during arrangement.

The disassembly shall be carried out in reverse order. Due to various non-standard Hydraulic cylinder The layout and size are not fully communicated, and the assembly steps are slightly different. Generally, the oil in the two chambers of the oil cylinder should be drained, and then the cylinder head should be assembled backward, and finally the piston and piston rod should be assembled. When assembling the cylinder head of non-standard hydraulic cylinder, special tools shall be used for the internal bayonet key or snap ring to prevent the use of flat shovel; Flange end caps must be pushed out with screws, and hammering or hard prying is not allowed. When it is difficult to pull out the piston and piston rod, do not pull them out by force. Find out the reason first and then assemble them.

Foshan Fuchao Hydraulic Electromechanical Equipment Co., Ltd. is a hydraulic machinery manufacturer integrating design, development, production, sales and service Oil cylinder manufacturer Enterprise. With professional processing equipment and strong technical force, we can design special non-standard hydraulic machinery, non-standard oil cylinders and Hydraulic system 。

Fuchao Hydraulic cylinder manufacturer Adhere to the service concept of "treat people with integrity, quality first, customer first", and the spirit of pioneering and enterprising. Improve the production process by integrating the professional technology of similar products at home and abroad. Reliable products are manufactured with imported excellent hydraulic parts and domestic hydraulic parts. It is widely used in metal material industry for forming products.