1、 Hydraulic cylinder manufacturer yes Hydraulic cylinder Contour treatment:

Mainly cleaning and polishing.

Use absorbent cotton dipped with acetone or absolute ethanol to clean the scratched part and then polish it. Hydraulic cylinder factory When polishing the hydraulic oil cylinder, first polish some of the squeezed parts beyond the reference plane to below the reference plane to prevent the plunger from being scratched again, then remove the oil stain and foreign matter in the scratched groove with a ten brocade file, and finally roughen all the scratched surfaces with a rotary file. Clean and heat, and clean the polished scratch surface with acetone. In the future, use a hot air blower or iodine tungsten lamp to dry the water, and preheat the outside of the modification. It is necessary to preheat the modified appearance when the room temperature is lower than 15 ℃.   　

2、 Hydraulic cylinder Manufacturer's application data for hydraulic cylinder:

Apply the harmonious and uniform 2211F onto the scratched surface; The first layer shall be thin, even and all the scratched surfaces of the cover shall be bonded to the metal appearance, and then the data shall be applied to all the modified parts and pressed again and again. The pipe material shall be filled up to the required thickness, so that it is slightly higher than the external appearance of the cylinder wall.   　

3. Curing:

At 24 ℃, it will completely reach all compliance requirements for 24 hours. In order to be extravagant, the hydraulic cylinder manufacturer must advance the temperature through the tungsten halogen lamp. Every time the temperature increases by 11 ℃, the curing time will shrink by half, and the curing temperature will be 70 ℃.

Foshan Fuchao Hydraulic Electromechanical Equipment Co., Ltd. is a hydraulic machinery manufacturing enterprise integrating design, development, production, sales and service. We Hydraulic cylinder manufacturer With professional processing equipment and strong technical force, we can design special non-standard hydraulic machinery, non-standard oil cylinders and Hydraulic system 。

Our company follows the service concept of "treat people with integrity, quality first, customer first", and the pioneering spirit. Improve the production process by integrating the professional technology of similar products at home and abroad. Reliable products are manufactured with imported excellent hydraulic parts and domestic hydraulic parts. It is widely used in metal material industry for forming products.