Oil cylinder is an important component used to transmit pressure and realize mechanical movement, and its interior is filled with hydraulic oil.

In the process of cylinder operation, the state and quality of oil will directly affect the working efficiency and life of the cylinder.

Therefore, Oil cylinder manufacturer It is necessary to regularly check the oil state and oil quality of the oil cylinder to ensure the normal operation of the oil cylinder.

1. The cylinder manufacturer needs to use special tools and equipment to check the oil in the cylinder.

They can judge the state of the oil by observing the oil color, turbidity and bubbles in the oil cylinder.

Under normal circumstances, the oil should be transparent, colorless or light yellow, without obvious impurities and bubbles.

If the oil is turbid, black or has suspended particles, it indicates that the oil is dirty or contains impurities, and it needs to be replaced in time.

2. The oil cylinder manufacturer can also judge the oil quality by measuring the viscosity and temperature of the oil.

They can use a viscometer to measure the viscosity of the oil,

In general, the viscosity of the oil should meet the viscosity range specified by the equipment manufacturer.

At the same time, they can also measure the temperature of the oil through a thermometer to ensure that the oil is within the normal operating temperature range.

3. In addition to the above methods, the oil cylinder manufacturer can also send oil samples to the laboratory for oil quality analysis.

The laboratory can detect the impurity content, acidity, alkalinity, moisture content and other indicators in the oil through chemical analysis, viscosity measurement, ion analysis and other means, so as to judge the quality of the oil.

In conclusion, the oil cylinder manufacturer can check the oil state and quality of the oil cylinder by observing the appearance of the oil, measuring the viscosity and temperature, and conducting laboratory analysis. The normal operation and service life of the oil cylinder can be ensured only if the oil problems are found in time and corresponding treatment measures are taken. Therefore, the oil cylinder manufacturer should pay attention to the management and inspection of oil in daily production to ensure the safe and reliable operation of the oil cylinder.