Hydraulic cylinder Lubrication and commissioning shall be carried out before production to ensure its normal operation and use effect.

Lubrication and commissioning of the hydraulic cylinder is a very important link. Only by doing this step well, can the stability and reliability of the cylinder be guaranteed.

1. During the production of hydraulic cylinders,

It is necessary to apply proper amount of lubricating oil or grease to the piston, piston rod, seal ring and other parts,

In order to reduce friction and wear, improve the working efficiency and life of the oil cylinder.

The selection of lubricating oil shall be determined according to the working environment and conditions of the hydraulic cylinder,

Generally speaking, common lubricating oils include hydraulic oil, high-temperature grease, special lubricating oil, etc.

2. Before installation and commissioning of hydraulic cylinder Hydraulic system Leakage test and leak tightness test.

For the newly produced hydraulic cylinder, the leakage test should be carried out first to check whether the cylinder itself and the connecting parts have leakage.

If there is leakage, repair or replace the seal in time to ensure the tightness of the cylinder.

At the same time, the hydraulic system needs to be debugged and adjusted to ensure smooth and stable operation of the hydraulic cylinder.

3. During the use of hydraulic cylinder,

The lubricating parts and seals shall be inspected and maintained regularly, and the lubricating oil and hydraulic oil shall be replaced in time to extend the service life and performance of the oil cylinder.

At the same time, the pressure and flow of the hydraulic system shall be adjusted timely according to the working conditions and load conditions of the oil cylinder to ensure the working effect and stability of the oil cylinder.

In a word, the lubrication and commissioning of the hydraulic cylinder should be done well in the production process, which is the key to ensure the normal operation and use effect of the cylinder. Only by ensuring good lubrication and sealing performance of the oil cylinder can the working efficiency and service life of the oil cylinder be improved, the number of failures and maintenance be reduced, and the stability and reliability of the hydraulic system be guaranteed. Therefore, Hydraulic cylinder manufacturer Pay attention to lubrication and commissioning during production to ensure product quality and user satisfaction.