one Oil cylinder manufacturer The cylinder with the pull rod cylinder extended (TB, TC, TD) is suitable for the application of transmitting linear force, and is especially useful when space is limited. For compression purposes, install the cylinder head end tie rod properly; When the piston rod is stretched, the installation method of cylinder head end shall be specified. The cylinder with the pull rod extending from both ends can be fixed to the machine component from either end, and the free end of the cylinder can support a bracket or switch.         

2. Flange mounted (JJ, HH) cylinders are also suitable for applications that transmit linear force. For compression type applications, the cylinder head shall be installed in a proper way; When the main load makes the piston rod stretched, the cylinder head shall be designated for installation.         

3. The cylinder installed on the tripod (C) does not absorb the force on its centerline. As a result, the force exerted by the cylinder produces a tipping moment, attempting to turn the cylinder around its mounting bolt. Therefore, it is important to fix the cylinder firmly on the mounting surface and guide the load effectively to avoid the lateral load being applied to the piston rod sealing device and piston guide ring.         

4. Hinged installation (B, BB, SBd) The cylinder with hinged installation that absorbs the force on its centerline should be used when the machine components will move along a curve. If the curve path of the piston rod is within a single plane, the cylinder with fixed double earrings in modes BB and B can be used; For the purpose in which the piston rod will travel along each measured path of the actual motion plane, it is recommended to install SBd on spherical bearing.         

5. The cylinder with trunnion mounted (D, DD, DB) is designed to absorb the force on its centerline. They are suitable for tension (tension) or compression (thrust) purposes, and can be used when machine components will move along a curved path in a single plane. The trunnion pin is only designed for shear load and shall bear minimum bending stress.