Oil cylinder is a very important hydraulic component, which is widely used in various mechanical equipment.

When installing the oil cylinder, the angle is a key point that needs special attention. Different installation angles will affect the performance and life of the oil cylinder.

Oil cylinder manufacturer The angle problems to be considered during cylinder installation mainly include the following aspects:

1. Selection of installation angle:

The installation angle of the oil cylinder shall be determined according to the specific working requirements and installation environment.

Generally speaking, the effect of vertical installation of oil cylinder is better, which can reduce Hydraulic system Power loss and leakage risk.

However, in actual work, due to the limitations of various factors, sometimes it is necessary to choose horizontal or other tilt angles for installation.

When selecting the installation angle, it is necessary to comprehensively consider the bearing capacity, working environment and safety factors of the oil cylinder to ensure that the installation angle meets the requirements.

2. Influence of installation angle:

The installation angle will directly affect the working effect and life of the oil cylinder.

When vertically installed, the working efficiency of the oil cylinder is high, and the hydraulic oil can make full use of gravity to accelerate falling or rising, reducing energy loss;

When installed horizontally or obliquely, the hydraulic oil needs to overcome the influence of additional gravity, which will increase the working load and friction resistance of the oil cylinder, and reduce the working efficiency and life.

Therefore, proper angle shall be selected during installation to avoid unnecessary influence.

3. Adjustment of installation angle:

In the actual installation process, sometimes the angle is not appropriate and needs to be adjusted in time.

When installing the oil cylinder, the oil cylinder manufacturer needs to use professional tools and equipment to measure and adjust the installation angle to ensure that the oil cylinder is installed at the correct position and angle.

When adjusting the installation angle, pay attention to avoid deformation or damage of the oil cylinder to ensure the installation quality and effect.

To sum up, the oil cylinder manufacturer needs to pay special attention to the angle problem when installing the oil cylinder, select a suitable installation angle, avoid unnecessary influence, and adjust the angle in time to ensure that the oil cylinder can work normally and play a good role. Only by doing so can we ensure the normal operation of the hydraulic system and the long-term stability of the equipment. I hope the above content can help you.