How to repair the hydraulic cylinder?
2021-08-18
The cylinder barrel, piston and piston rod are worn or grooved. 1) When repairing, the inner, outer diameter and roundness of the cylinder barrel, piston and piston rod shall be measured. If the inner hole of the cylinder barrel is seriously worn, the grinding mandrel can be used for grinding or honing on the boring machine for repair; If the outer circle of the piston is worn, it can be repaired by electroplating. If it is worn seriously, it should be replaced. If the piston rod is worn, brush plating can be carried out first, then grinding, and then
Learn more+
