HOB cylinder inlet oil seal all steel parts plus copper sleeve

Hydraulic cylinder Application and protection of

1. The viscosity of oil used for hydraulic cylinder is 29~74mm2/S. ISO VG46 anti-wear hydraulic oil is recommended. The oil temperature is - 20~80. C range. When the ambient temperature and operating temperature are low, the oil with lower viscosity can be selected.         

2. The filtering accuracy of the hydraulic cylinder request system shall not be less than 80um. The oil pollution shall be strictly controlled, the oil shall be kept clean, the function of the oil shall be checked on schedule, and the necessary dense filtering and replacement of new oil shall be carried out.        

3. During assembly, ensure that the deviation of the piston rod top end shall be consistent with the deviation of the cylinder head, earrings (or central hinge shaft), and ensure the straightness of all piston rods during the advance and retreat process to prevent the appearance of rigid disturbance and unnecessary damage.

4. After the hydraulic cylinder is installed on the main engine, first check whether there is oil leakage at the oil port piping part and the guide sleeve, and oil should be added to the ear ornaments and the central hinge bearing.        

5. If the hydraulic cylinder needs to be disassembled due to oil leakage and other problems, use hydraulic pressure to move the position of the piston to any end position of the cylinder barrel. During disassembly, only improper knocking and sudden dropping should be controlled.        

6. Before disassembling, loosen the overflow valve to make the pressure of the hydraulic circuit drop to zero, then cut off the power supply to make the hydraulic assembly stop running, and after loosening the oil port piping, plug the oil port with an oil plug.        

7. The hydraulic oil cylinder cannot be used as an electrode for grounding to avoid electric shock to the piston rod.